Lincoln Energy Sdn Bhd
3, Jalan PTP 1/4, Taman Perindustrian Tasik Perdana, 47120 Puchong, Selangor, Malaysia.
+603-8060 6131
+6017-370 9669
(Sales & Product)
+6012-777 6418
(Customer Care)
+6019-277 8678
(Technical Sales and Marketing)
+6017-370 9669
(Sales & Product)
+6012-777 6418
(Customer Care)
+6019-277 8678
(Technical Sales and Marketing)
+603-8060 6639
+60192778678
UTP S DUR 250
| Previous | 4 / 9 | Next |
Basic coated stick electrode
Hardness of the pure weld deposit Approx. 270HB
UTP S DUR 250 has a very good resistance against compression and rolling strain. The weld metal is easily machinable.
Classifications
- DIN 8555
- EN 14700
- E 1-UM-250
- E Fe1
Characteristics and field of use
UTP S DUR 250 is used for surfacing on parts, where a tough and easily machinable deposit is required, such as rails, gear wheels, shafts, crane wheels, track roller and other parts on farming and building machineries. Also suitable as cushion and filler layer on non-alloyed and low-alloyed
steels and cast steels.
Hardness of the pure weld deposit Approx. 270HB
1 layer on steel with C = 0.5% Approx. 320HB
UTP S DUR 250 has a very good resistance against compression and rolling strain. The weld metal is easily machinable.